Step 1: Assess if you need to adjust the belt.
You will notice an obvious gap, on either the right or left side of the running belt. You might also hear noise coming from the Walker if the belt is rubbing against one of the sides.
Step 2: Set the Egofit walker's speed to 2km/h and use the screw adjustments on the back of either side of the treadmill.
Utilizing the allen key that was included with your Egofit Walker, adjust the screw on whichever side of the Egofit where there was a gap (e.g. if there is a gap on the right side, adjust the right screw, turning the allen key clockwise by 90 degrees. If there is a gap on the left side, adjust the left screw turning the allen key clockwise by 90 degrees) For a gap on the right side, turn the allen key clockwise by 90 degrees.
Step 3: After making the adjustments, walk on treadmill and check to see if the gap corrects and disappears. If the gap does corrects and disappear, the running belt has been correctly adjusted.
Step 4: If the gap narrowed but did not disappear, repeat above steps. Using the allen key to adjust the side with the gap that has now been narrowed. Again, walk on the Egofit Walker and watch for the belt to correct and go back to center.
